HJC RPHA 60

The HJC RPHA 60 is an ECE 22.06 adventure full-face motorcycle helmet designed around a road visor, external peak and internal sun shield. This collection includes solid and graphic helmets alongside HJ-47 replacement visors and the model-specific DKS602 Pinlock insert.

Choose the helmet by fit and intended use before deciding on colour. If you already own an RPHA 60, use the HJ-47 and DKS602 part codes to identify compatible vision components.

Adventure format for road and trail use

The RPHA 60 combines a full-face chin bar with a wide eye port, long road visor and external peak. The visor gives wind and weather coverage on the road, while the peak can help with low sun, loose surfaces and changing terrain.

HJC states that the peak was developed with wind-tunnel and computational-fluid-dynamics testing to manage drag and high-speed stability. That does not remove the need to test the helmet with your own motorcycle, riding position and luggage setup.

Second-generation PIM shell and ventilation

HJC describes the RPHA 60 shell as second-generation Premium Integrated Matrix construction. The laminated composite structure is intended to balance impact performance, durability and weight for demanding conditions.

The Advanced Channeling Ventilation System uses three intakes and four exhausts to move air from front to back. Ventilation depends on speed, visor position and ambient conditions, so riders should learn the controls while stationary before adjusting them on the road.

Fit, fastening and interior

Use the size guide on the individual product page as a starting point, then assess the helmet on your own head. The crown should contact evenly without a concentrated hotspot, and the cheek pads should hold the shell stable without causing painful pressure.

• Wear the helmet for several minutes to reveal pressure at the forehead, temples or rear.
• Fasten the double-D rings and confirm that the strap sits securely beneath the jaw.
• Rotate the shell gently and check that the skin moves with the cheek pads.
• Test glasses, earplugs and your usual upright or standing riding position.

HJC specifies removable and washable crown and cheek pads, moisture-wicking quick-drying fabric and interchangeable cheek-pad thicknesses across the size range. It is also prepared for SMART HJC 11B, 21B and 50B systems, which are sold separately.

Read our motorcycle helmet sizing guide before measuring. The Moto Central head-shape video explains why two helmets with the same circumference can still fit differently.

HJ-47 visor and HJ-V12 sun shield

Official HJC fitment identifies HJ-47 as the RPHA 60 outer visor. It is Pinlock prepared, anti-scratch coated and specified to provide 99% UV protection. This collection includes clear, dark smoke and RST mirrored replacements in several colours.

The HJ-V12 is the separate internal sun shield. HJC installs a dark smoke version and provides multi-step adjustment. The outer visor and internal shield perform different jobs and are not interchangeable.

DKS602 Pinlock 120 XLT MaxVision

Pinlock identifies DKS602 as the clear Pinlock 120 XLT MaxVision insert made for HJC HJ-47 visors and the RPHA 60. It mounts inside a compatible prepared outer visor to help manage condensation; it does not replace a scratched or damaged HJ-47 shield.

• Match the RPHA 60 helmet, HJ-47 visor and DKS602 insert codes before ordering.
• Install the insert with the outer visor removed and supported on a clean, soft surface.
• Check that the silicone seal makes continuous contact around the lens.
• Clean with lukewarm water and a soft cloth, then allow both parts to air-dry.

HJC lists a long smoke shield, DKS602 Pinlock 120 XLT lens, installed chin curtain and breath deflector among the standard box contents. Confirm the contents stated on the exact Moto Central listing before purchase.

Peak, visor and accessory checks

Before riding, make sure the peak fasteners are secure and the peak does not obstruct the visor. Open and close the HJ-47 several times to confirm that both pivots engage evenly and the shield seals correctly.

Communication units, cameras and other accessories can affect noise, airflow and balance. Use model-specific mounting points where provided and never drill the shell or fit an accessory where it obstructs a vent or visor mechanism.

Cleaning and inspection

Use mild soap, lukewarm water and a soft cloth on the shell, visor and peak. Avoid fuel, solvents, abrasive compounds and household glass cleaners. Let removable lining parts dry naturally before refitting every fastener.

Inspect the shell, EPS, strap, double-D rings, visor pivots and peak fittings regularly. A helmet that has received a significant impact should be assessed for replacement even if damage is not obvious from the outside.

Why buy an HJC RPHA 60 from Moto Central?

Moto Central groups current helmet colours with compatible HJ-47 visors and the DKS602 insert, making it easier to compare a complete helmet with the parts needed later. Our showroom team can assist with fit and help identify model-specific replacement components.

Compare more adventure helmets, explore the wider HJC helmet range, or find additional components in helmet spares and accessories.

Customer questions

Is the HJC RPHA 60 approved to ECE 22.06?

Yes. HJC specifies ECE 22.06 approval. Check the physical approval label before use.

Which outer visor fits the RPHA 60?

Choose an HJ-47 outer visor. The HJ-V12 code refers to the separate internal sun shield.

Which Pinlock insert fits the HJ-47 visor?

Choose the clear DKS602 Pinlock 120 XLT MaxVision insert for a compatible, prepared HJ-47 visor.

Is the communication system included?

No. The RPHA 60 is prepared for SMART HJC 11B, 21B and 50B systems, but the unit is sold separately.

Does every product on this page include a complete helmet?

No. The collection also contains individual HJ-47 visors and a DKS602 Pinlock insert. Check the product title before ordering.