HJC RPHA 11

This HJC RPHA 11 collection combines a remaining complete helmet with replacement visors and Pinlock inserts. Most of the current catalogue consists of HJ-26 outer visors for the RPHA 11 and RPHA 11 Carbon, plus DKS161 Pinlock 120 inserts. A small number of HJ-26ST visors for the RPHA 70 family also appear on the page and must not be mistaken for RPHA 11 parts.

Check whether you are buying the Pearl White helmet, an HJ-26 visor, an HJ-26ST visor or a DKS161 insert before selecting a product. The similar part names do not make the two outer-visor types interchangeable.

Choosing the correct HJ-26 visor

For an HJC RPHA 11 or RPHA 11 Carbon, choose an outer visor whose product title states HJ-26. Current options include clear, smoke and iridium finishes, plus a clear race visor with a rain seal. The standard HJ-26 range is prepared for a model-specific Pinlock insert, while HJC also describes a flat race-style version with tear-off posts.

DKS161 Pinlock 120 fitment

DKS161 is the model-specific Pinlock code shown for this visor family. Pinlock's official information identifies DKS161 for both the RPHA 11 and RPHA 70 families, while the Moto Central listings state compatibility with HJ-26 and HJ-26ST prepared visors. The current collection includes clear and yellow Pinlock 120 MaxVision choices.

Match all three elements before ordering: the helmet model, the outer-visor code and the DKS161 insert code. A Pinlock insert mounts inside the visor and cannot replace a scratched or damaged outer shield.

• Install it with the outer visor removed and supported on a clean, soft surface.
• Check that the silicone edge makes continuous contact around the lens.
• Handle the insert by its edges and avoid touching the moisture-absorbing surface.
• Use lukewarm water and a soft cloth for cleaning, then allow it to air-dry naturally.

About the HJC RPHA 11 helmet

The RPHA 11 is an earlier-generation sports full-face helmet designed around a tucked riding position. HJC specifies an aerodynamic shell, enlarged eye port, Advanced Channeling Ventilation System, removable moisture-managing interior, emergency-release cheek pads and a RapidFire tool-free visor mechanism.

The model was produced under the ECE 22.05 standard rather than ECE 22.06. When considering remaining stock, confirm the approval label and ensure it meets the requirements for your intended road, track or competition use. The collection currently shows Pearl White, with available sizes determined by remaining stock.

Checking helmet fit

Measure around the widest part of the head, then assess pressure distribution rather than relying only on the size label. The RPHA 11 should feel secure and even around the crown and cheeks, without a sharp hotspot at the forehead, temples or rear of the head.

• Wear it for several minutes before deciding.
• Check that the cheek pads move the skin when the shell is rotated gently.
• Fasten the strap and confirm that the helmet cannot be rolled forwards or lifted from behind.
• Try your glasses and usual riding position during the assessment.

Our helmet sizing guide explains how to measure, while the Moto Central head-shape video shows why helmets with the same stated circumference can fit differently.

Visor care and replacement checks

Inspect the visor for cracks, deep scratches, damaged locking points and excessive play at the mechanism. Fit both sides evenly and make sure it opens, closes and locks correctly before riding. Avoid solvents, fuel, abrasive compounds and household glass cleaners.

If the visor mechanism, shell or mounting area is cracked or distorted, replacing the visor alone may not make the helmet serviceable. Arrange a specialist assessment before use.

Why buy HJC RPHA 11 parts from Moto Central?

Moto Central groups the remaining helmet, outer visors and DKS161 inserts together, making it easier to identify which component is being selected. Our team can help distinguish HJ-26 from HJ-26ST when the part code is visible and can assist showroom visitors with helmet sizing.

Find more model-specific components in helmet spares and accessories, browse the wider HJC range, or compare current motorcycle helmets.

Customer questions

Does every visor here fit the HJC RPHA 11?

No. HJ-26 fits the RPHA 11 and RPHA 11 Carbon. HJ-26ST is officially assigned to the RPHA 70 and RPHA 70 Carbon.

Which Pinlock fits an HJ-26 visor?

Choose DKS161 for a compatible Pinlock-prepared HJ-26 visor.

Is the RPHA 11 an ECE 22.06 helmet?

No. HJC's official RPHA 11 information identifies ECE 22.05 approval. Check the physical approval label before purchase or event use.

Are all products on this page complete helmets?

No. Most are replacement outer visors or Pinlock inserts. The product title and image identify whether you are viewing the Pearl White helmet or an individual component.