HJC i40

The HJC i40 collection at Moto Central mainly contains model-specific visor parts: clear, dark smoke and iridium XD-15 outer visors, clear and dark smoke DKS281 Pinlock 70 MaxVision inserts, and an IS-11 dark smoke internal sun visor for the original i40.

These components are not interchangeable. The XD-15 is the helmet's long outer face shield, the DKS281 is an anti-fog lens fitted inside a prepared XD-15, and the IS-11 is the smaller retractable sun shield inside the original i40. Match the part code and helmet generation before ordering.

Choose the correct HJC i40 component

XD-15 fitment for the i40 and i40N

HJC identifies the XD-15 as the Pinlock-prepared outer visor for the i40N, and Moto Central's genuine XD-15 listings cover both the original i40 and i40N. Check XD-15 on the existing shield or helmet documentation before purchase rather than relying on the similar model names alone.

The RapidFire ratchet arrangement allows tool-free shield removal, but the visor still needs to engage securely on both sides. A correctly fitted XD-15 should move smoothly, sit evenly against the eye-port seal and remain stable in each normal opening position.

Clear, dark smoke and iridium outer visors

The clear XD-15 is suitable for the broadest range of light conditions, including poor weather and night riding. Dark smoke reduces incoming light in bright conditions, while iridium blue, gold and silver finishes add a mirrored surface and also alter light transmission.

Tinted and iridium visors are not appropriate for every journey. UK road-use requirements apply to visor markings and light transmission, so check the markings and choose for the actual conditions. Carry a clear visor if a ride may continue after dark or into worsening weather.

Colour does not compensate for scratches, haze or damaged pivots. Replace an outer shield if wear interferes with the normal field of view or prevents secure operation.

DKS281 Pinlock 70 MaxVision inserts

Pinlock specifies DKS281 for the HJC i40 visor. It is a Pinlock 70 MaxVision lens shaped to sit within the XD-15 visor's prepared recess and on its HJC-specific pins. The insert's moisture-absorbing surface and silicone seal work together to limit condensation inside the main shield.

Choose clear when you want anti-fog performance without intentionally reducing light. The dark smoke DKS281 combines anti-fog function with tint for bright conditions. Avoid stacking a dark insert behind a heavily tinted outer visor, as the combined reduction in available light may compromise vision.

A DKS281 is not a replacement outer visor and cannot be used alone. It must be installed inside a clean, compatible XD-15 with the silicone seal facing the visor.

Fitting and adjusting the Pinlock insert

Remove the outer visor and work on a clean, stable surface. Flex the XD-15 only as directed, locate the DKS281 on the pins and allow the visor to return to shape. The silicone seal should make continuous contact without folds or visible gaps.

If moisture appears between the two lenses, inspect the seal and pin tension rather than pressing or overtightening without reference to the instructions. After fitting, confirm that the visor still closes correctly and that the insert does not obscure the normal field of view.

IS-11 internal sun visor

The IS-11 is a dark smoke internal sun shield for the original i40. It sits behind the clear outer visor and retracts into the shell when not required. It is different in size, shape and mounting method from the XD-15.

Operate the mechanism before dismantling the helmet so its normal travel is understood. Fit the replacement without forcing the guides, then confirm that it deploys evenly, retracts completely and does not touch the nose, eyelashes or spectacles.

Some current HJC i40N documentation uses a different sun-shield reference. Do not assume that IS-11 fits every i40-family helmet simply because the XD-15 outer visor is shared.

Cleaning and care

Clean an XD-15 with water, mild soap and a soft cloth. Soften insects before wiping and avoid fuel, solvents, household glass cleaner and abrasive materials. Let the shield dry naturally before refitting.

The Pinlock surface is softer than the outer visor. Rinse loose dust away, wash gently when needed and do not rub it with paper towels. Store spare visors and inserts in a clean protective sleeve away from heat and direct sunlight.

Why buy HJC i40 visor parts from Moto Central?

Moto Central groups the XD-15 outer visors, matching DKS281 inserts and original-i40 IS-11 sun shield together so component type, tint and fitment code can be compared before ordering. Our team can help distinguish the external visor from the two inner lens types and check the reference against an existing part.

Browse the wider HJC helmet range, compare motorcycle helmet visors, find Pinlock inserts or view more helmet spares and accessories.

Customer questions