Motorcycle tyre warmers preheat tyres while the bike is stationary, primarily for circuit riding and racing. This Moto Central range is made up of BikeTek and MotoGP-branded warmers for several 17-inch front and rear tyre combinations, with both UK three-pin and European two-pin plug versions. Some listings are complete front-and-rear sets while others are rear warmers, so the product title and manufacturer reference matter.
Choose by exact tyre size
Begin with the size moulded into each tyre sidewall, not the motorcycle model alone. The collection currently covers combinations including 90/70-17 with 125/55-17, 110/70-17 with 140/70-17, 120/70-17 with 160/60-17, 120/70-17 with 180 or 190-section rears, and 120/70-17 with 200/55-17 rears. A warmer intended for a 160-section rear is not a substitute for one labelled for a 200-section tyre.
- Check front and rear separately: confirm both sizes even when the listing describes a set.
- Read the full size notation: width, profile and rim diameter all form part of the fit.
- Allow for the actual tyre: nominally similar tyres can differ in overall shape. The warmer should wrap smoothly without stretched closures, loose sections or exposed tread.
- Identify sets and single warmers: several BikeTek listings in this collection are rear-only products.
UK and European plug versions
The same tyre-size pairing can appear with a UK three-pin plug or a European two-pin plug. Choose the version that matches the paddock supply you will actually use. If an adaptor or extension lead is needed, it must be correctly rated, suitable for the environment and fully uncoiled where its instructions require. Avoid improvised electrical connections around wet ground or exposed paddock areas.
Fixed-temperature warmers and indicators
The BikeTek and standard MotoGP products listed here are generally presented as thermostatically controlled warmers with heating and ready indicators. That does not mean every item has adjustable temperature control or identical indicator behaviour. Check the individual listing and supplied instructions for the operating temperature, warm-up time and light sequence of the exact reference.
Tyre requirements vary by construction and compound. Do not copy another rider’s temperature or pressure routine without confirming that it applies to your tyres. If the tyre manufacturer does not recommend warmers for the product, seek qualified guidance before using them.
Safe paddock setup
- Support the motorcycle securely so both wheels can be wrapped without trapping the warmer or cable. A suitable pair of motorcycle paddock stands is normally required.
- Fit each warmer evenly around a clean tyre before switching it on. Make sure the heating surface is not folded, twisted or overlapping itself.
- Keep cables away from hot exhaust parts, sharp edges, moving equipment and standing water.
- Use the full preparation time stated by the warmer and tyre manufacturers. An illuminated ready light confirms the warmer’s thermostat state, not the temperature throughout every part of the tyre or wheel.
- Switch off and unplug before removing the warmers. Take care around the hot tyre and heating surface.
- Let warmers cool in the position recommended by the manufacturer before rolling, folding or placing them in the storage bag.
Why buy motorcycle tyre warmers from Moto Central?
Moto Central lists the tyre pairing and plug type in each product name, making it easier to separate small-bike, middleweight, supersport and wider superbike options. Our team can help compare the current references and clarify whether a listing is a full set or a rear-only warmer before you order. Always have your front and rear tyre markings to hand when asking for fit advice.
Customer questions
Do I need tyre warmers for an ordinary road ride?
These products are intended mainly for controlled circuit and race preparation while the motorcycle is stationary. They are not a substitute for riding appropriately for road, weather and tyre conditions.
Can I use a 180-section rear warmer on a 200/55 tyre?
Only if the exact warmer specification expressly includes both sizes. The collection contains dedicated rear-size options, so match the listing to the tyre sidewall.
Does a set always include both warmers?
No. Listings described as a set normally include front and rear units, while several products are clearly labelled as rear warmers. Check the title and pack contents.
Can I plug an EU warmer into a UK socket?
Only through a correctly rated and suitable adaptor, used in accordance with its instructions and the circuit’s electrical rules. Choosing the correct plug version from the outset is usually simpler.
