Icon Models

Icon Helmet Spare Parts

7 products

Showing 1 - 7 of 7 products

Icon helmet spare parts are model-specific components for current and legacy helmets. This collection includes comfort liners, chin curtains, side plates, pivot kits, airfoils, spoilers, peaks, covers, straps and smaller trim pieces. A similar shape or colour is not proof of compatibility.

Before ordering, identify the full helmet model, approval generation, helmet size and part number. Some systems are shared across named families, while others are unique to one model. Airflite ECE 22.05 and later-generation parts must not be mixed unless Icon or the product listing explicitly confirms compatibility.

Grey Icon Airflite R1 replacement comfort liner kit — Airflite R1 comfort liner kits are sized parts. Match the helmet version and the size shown in the selector.

Black Icon Optics visor pivot kit for Airmada Airform and Airframe Pro helmets — The Optics pivot kit is listed for Airmada, Airform and Airframe Pro. It is not the same as the older Proshield mechanism.

Black replacement rear cover for Icon Threshold modular helmet — Threshold uses its own modular-helmet components, including this model-specific rear cover.

How to identify the correct Icon spare

Helmet family: check the full model name, such as Airflite, Airform, Airframe Pro, Airmada, Domain, Threshold, Ultraflite, Variant Pro or Alliance.
Approval generation: where the title states ECE 22.05 or ECE 22.06, match the marking inside your helmet.
Part family: Optics, Proshield, Airflite, Domain, Threshold and Ultraflite components are separate systems.
Size: liners and cheek pads can vary by helmet size and shell grouping. Select the size specified for the part.
Finish: Rubatone, RST and graphic-specific external pieces may fit mechanically but differ in colour or surface treatment.
Part number: compare the manufacturer code whenever it is available.

Do not force a component: if the clips, screws, pivots or locating tabs do not align naturally, stop and recheck the helmet model and part number.

Airflite parts and generation checks

The Airflite selection includes crown liners, comfort-liner kits, chin curtains, side plates, rear spoilers and Airfoil accessories. Product titles can also identify an ECE generation. Icon publishes specific Airflite Airfoil part numbers, and Moto Central retains the ECE 22.05 wording where it is supplied for the part.

An exterior graphic does not reliably identify a helmet's approval generation. Read the approval label inside the helmet and match the full spare-part title. For liners, use both the helmet version and size rather than choosing solely by colour.

Optics and Proshield mechanisms

Icon states that the Optics shield family is compatible with Airframe Pro, Airform and Airmada helmets. The corresponding Optics pivot kit in this collection names those three families. Older Airframe, Alliance and Alliance GT helmets use Proshield-related parts, and their pivot kit is a different product.

Side plates are decorative covers fitted around compatible visor mechanisms. They are not a substitute for damaged pivot hardware. Match the shield family, mechanism and side plates as a complete system.

Threshold, Domain and Ultraflite

Threshold is an ECE 22.06 modular helmet with its own shield, internal Dropshield, Hydradry liner and model-specific trim components. Domain uses its own Domain shield and removable Hydradry interior, while Ultraflite uses the Ultrashield, Dropshield Ultra and a three-piece Hydradry liner. Components from these newer families are not interchangeable merely because they carry the Icon name.

Browse Icon visors for outer shields and model-specific vision products. This spare-parts page is better suited to mechanisms, interiors, exterior trim and supporting hardware.

Comfort liners and cheek pads

Replacement interiors can refresh worn or damaged soft components, but they must match the helmet and size. Compare the removed liner's labels and fastening layout with the replacement. Fit every press stud, tab and hook-and-loop section without stretching the material across the EPS.

Choose crown liners and cheek pads by the exact model and listed size.
Check left and right orientation before fastening.
Keep straps, emergency-release tabs and ventilation channels unobstructed.
After fitting, confirm the helmet remains secure and even around the head.

When a spare part is appropriate

Replaceable trim, comfort interiors and mechanisms can address normal wear or a missing detachable component. They do not repair a cracked shell, damaged EPS, distorted chin bar or other structural damage. If a helmet has received a significant impact, follow the manufacturer guidance and replace the helmet when required rather than attempting a cosmetic repair.

Why buy Icon helmet spares from Moto Central?

Moto Central keeps model, generation, finish and size information in the product titles wherever it is supplied, which makes compatibility easier to check before ordering. You can compare complete models in Icon helmets, browse the wider helmet spares and accessories range, or return to all Icon products.

Customer questions

Will any Icon liner fit any Icon helmet?

No. Match the helmet family, version and size. Fastening layouts and shell groupings vary.

Does the Optics pivot kit fit an Icon Alliance?

No. The Optics kit is listed for Airframe Pro, Airform and Airmada. Alliance models use the separate Proshield system.

Can I fit an ECE 22.05 Airflite part to an ECE 22.06 helmet?

Do not assume compatibility. Match the approval generation and part number stated for the component.

Can a new spoiler make an impacted helmet safe again?

No. External trim does not repair structural damage. Follow Icon's inspection and replacement guidance after an impact.

Showing 1 - 7 of 7 products

Icon Information

Icon Domain Helmet Review - Modern Street Performance with Lightweight Comfort and Aggressive Styling - FREE UK Shipping, FREE 365 Day Returns | Moto Central

Nov 12, 2025 Kirk Bell

Icon Models

Filter

Colour

Gender

Category

Collection

Icon Helmet Spare Parts

How to identify the correct Icon spare

Airflite parts and generation checks

Optics and Proshield mechanisms

Threshold, Domain and Ultraflite

Comfort liners and cheek pads

When a spare part is appropriate

Why buy Icon helmet spares from Moto Central?

Customer questions

Will any Icon liner fit any Icon helmet?

Does the Optics pivot kit fit an Icon Alliance?

Can I fit an ECE 22.05 Airflite part to an ECE 22.06 helmet?

Can a new spoiler make an impacted helmet safe again?

Filter

Colour

Gender

Category

Collection

Icon Information

Icon Domain Helmet Review - Modern Street Performance with Lightweight Comfort and Aggressive Styling

Icon: The History of Attitude-Driven Ride Gear

Icon Airflite Helmet - Aggressive Urban Styling with Real-World Practicality

Ride In Style With MotoCentral: The Icon Airform Old Glory Helmet – Bold, Safe & Adventure-Ready!

Icon Airform Helmet Review: Everyday Comfort with Aggressive Street Style

Icon Airflite Helmet Review: Bold Styling Meets Modern Street Performance

Icon Airframe Pro Helmet - Track-Focused Performance with Aggressive Street Styling

Hitting The Streets With Icon Motorcycle Helmets

Icon Domain Helmet Review - Modern Street Performance with Lightweight Comfort and Aggressive Styling

Recently viewed

Icon Models

Filter

Brand

Colour

Gender

Category

Collection

Icon Information

Follow us