Shop motorcycle oils and lubricants at Moto Central, including chain lubes and greases, multi-use sprays, corrosion inhibitors, penetrating fluids, cable-lubrication tools, air-filter oil, coolant and selected motorcycle engine oils.
These products perform very different jobs and are not interchangeable. Use the motorcycle handbook and the individual product instructions to confirm the required oil grade, specification, application point and service procedure.
Motorcycle oils, greases and maintenance fluids
Chain lubricants and greases
Choose a product intended for the fitted chain and expected conditions. Clean as instructed, apply to the specified area and allow the recommended setting time before riding.
Engine oil and coolant
Match viscosity, specification, engine type and quantity to the motorcycle handbook. Coolants also have formulation and mixing requirements that must not be guessed.
Multi-use and penetrating sprays
These products may help with moisture displacement, lubrication or seized fasteners, depending on the formula. Check material compatibility and the exact intended use.
Corrosion and specialist protection
Corrosion inhibitors, waterproof greases and air-filter oils each need surface preparation and controlled application. More product is not automatically better.
How to choose motorcycle oil or lubricant
Start with the handbook
For engine oil, coolant and service fluids, use the viscosity, specification, capacity and replacement interval stated for the exact motorcycle.
Identify the component
A drive chain, control cable, bearing, air filter and electrical connector require different products. Choose one explicitly intended for the component and its materials.
Consider riding conditions
Wet-weather, dry-weather and all-weather chain products balance adhesion and contamination differently. Match the product to use and repeat maintenance as required.
Check the application method
Read whether cleaning, drying, shaking, brushing, spraying or curing is required. Use extension nozzles and cable tools only where their instructions permit.
Keep friction surfaces clean: never allow oil, grease, chain lubricant, corrosion inhibitor or multi-use spray onto brake discs, brake pads, tyre tread, grips, foot controls or other surfaces where reduced friction could be dangerous. Clean accidental contamination using the correct procedure before riding.
Why buy motorcycle oils and lubricants from Moto Central?
Moto Central offers everyday workshop fluids alongside specialist chain, corrosion, filter and engine products. Our team can help narrow the range by motorcycle, component, specification and riding conditions instead of treating every aerosol or lubricant as interchangeable.
Order online or visit our Wolvey, Leicestershire showroom. Contact us before travelling if you want us to confirm current availability of one exact grade, pack size or maintenance product.
Motorcycle oil and lubricant questions
Can I choose engine oil by viscosity alone?
No. The oil must also meet the required performance specification and be suitable for the motorcycle's engine and clutch arrangement.
Is any chain spray suitable for my motorcycle?
No. Confirm the product is intended for the fitted chain type and follow both the motorcycle and lubricant instructions.
Can multi-use spray replace a specialist lubricant?
Not automatically. Use a product designed for the component, load, temperature and materials involved.
Can corrosion inhibitor be sprayed everywhere?
No. Follow the product exclusions and keep it away from brakes, tyre tread, controls and any other safety-critical friction surface.
