Motorcycle helmet Pinlock inserts at Moto Central cover clear, tinted and model-specific anti-fog lenses across Pinlock 70, Pinlock 120 and other named systems. Most products are inserts for a prepared outer visor, although the collection also contains a small number of complete outer-shield packages supplied with a Pinlock insert.
The correct lens is determined by the visor and its Pinlock reference, not simply the helmet brand. Match the exact helmet model, generation, outer-visor code, DKS number and any stated size band before ordering.
How a Pinlock insert works
Pinlock explains that its anti-fog system uses a moisture-absorbing lens surface and an airtight seal to create a thermal barrier inside the outer visor. For that system to work as intended, the silicone seal needs even contact around the lens and the insert must sit correctly between the visor pins.
MaxVision inserts are shaped to sit within a matching recess in the outer visor, helping the lens cover more of the usable viewing area. A standard insert and a MaxVision insert should not be treated as interchangeable unless the product information specifically confirms it.
How to identify the correct Pinlock lens
Check the helmet generation
Record the full model name and approval generation where relevant. A later helmet can use a different visor even when the main family name remains familiar.
Find the outer-visor code
Inspect the visor edge or pivot area for the manufacturer's reference. The same helmet brand can use several unrelated visor systems.
Match the DKS number
Pinlock uses DKS numbers to distinguish lenses made for different visor shapes. Treat the number as a key compatibility reference, not a performance rating.
Confirm colour, level and size
After compatibility is established, select the listed lens colour, Pinlock level and any required size allocation. Read the supplied-parts information before ordering.
Pinlock 70, Pinlock 120 and named lens systems
Pinlock performance levels are not universal fitment groups. A Pinlock 70 lens and a Pinlock 120 lens still need to be made for the exact prepared visor. The higher performance designation does not allow one DKS reference to replace another.
This catalogue also includes manufacturer-specific descriptions such as MaxVision, XLT and PrecisionTone. These terms identify particular lens formats or features, but the full product title and compatibility information remain essential. Do not select by the marketing name alone.
Clear, tinted and changing-light inserts
A clear insert is the straightforward choice for mixed conditions, low light and night riding. Dark smoke, yellow, light tint and other lens colours are intended for particular lighting conditions. Check the product specification, approval information and the combined effect of the outer visor and insert before road use.
UK government guidance says approved visors must carry the appropriate marking, that visors transmitting less than 50% of visible light cannot legally be used on the road, and that “Daytime Use Only” visors should only be used in daytime. A tinted insert does not make an unsuitable outer visor appropriate for night or poor visibility.
Fitting and caring for a Pinlock insert
Follow the current Pinlock instructions and the helmet manufacturer's visor-removal procedure. Pinlock advises removing the outer visor, checking the pin position, gently flexing the visor to locate the insert and confirming in natural light that the silicone seal contacts the visor all the way around.
Remove the protective film after installation and check that the insert is seated without gaps, distortion or contact with the helmet aperture. Do not force the lens or alter the visor. If the seal is uneven, consult the instructions for the correct pin-adjustment method rather than increasing tension at random.
The insert surface is sensitive to scratching. Pinlock's care guidance recommends rinsing the insert and visor, using a clean wet microfibre cloth only where needed and allowing both parts to dry naturally before reassembly. Store a removed insert somewhere dark, dry and protected from dust.
Why shop Pinlock inserts at Moto Central?
This collection brings together more than 200 model-specific anti-fog products from numerous helmet and visor systems. Clear product titles retain the DKS reference, visor code, compatible helmet family, lens colour and performance level wherever those details are supplied.
If the outer shield is scratched, damaged or not Pinlock-prepared, browse motorcycle helmet visors. Pivot kits, liners, vents and other components are grouped under helmet spares and accessories. Compare the existing visor code and helmet label before ordering if any part of the fitment is uncertain.
Customer questions
Are Pinlock inserts universal?
No. Match the outer-visor code, DKS number, helmet model, generation and any stated size band.
Does Pinlock-ready mean a lens is included?
Not necessarily. It means the outer visor has the preparation needed for a compatible insert. Check the helmet or visor listing to see what is supplied.
Can I fit a different DKS number?
No, unless Pinlock or the helmet manufacturer explicitly lists it for the same visor. DKS numbers distinguish different lens shapes and applications.
Why is there a gap in the silicone seal?
The insert may be seated incorrectly or need the pin tension adjusted according to its instructions. Remove it carefully and follow the approved fitting procedure.
Can I use a dark Pinlock insert at night?
Use a lens and outer visor suitable for the available light. Do not use a dark tint in darkness or poor visibility, and follow all approval and daytime-use markings.
