Garmin motorcycle technology at Moto Central includes complete zūmo and Tread navigation systems, the zūmo R1 rearview radar, a Group Ride Tracker and the model-specific mounts, power cables, cases and controls needed to install or extend compatible devices. The important distinction is that most listings in this collection are accessories rather than complete sat-navs, so always check the product title and compatibility before ordering.
Garmin’s zūmo range is developed for motorcycle use, with bright glove-friendly displays and hardware designed for weather, vibration and rough roads. Current choices range from the compact 4.7-inch zūmo XT3 to 6-inch XT3 and XT2 systems, while the 5.5-inch zūmo XT remains available alongside supporting parts.
Choose the right Garmin motorcycle navigator
zūmo XT3: 4.7 or 6 inches
The current 4.7-inch zūmo XT3 suits riders wanting a compact screen and post-mount installation, while the 6-inch XT3 provides more display area and a conventional handlebar mount kit. Garmin specifies IPX7 water resistance, a MIL-STD-810 drop rating, bright glove-friendly screens, road and topographic mapping, downloadable satellite imagery, route planning and live lean-angle data.
zūmo XT2: established 6-inch touring
The zūmo XT2 is a 6-inch motorcycle navigator designed for handlebar vibration and wet-weather use. Garmin specifies an IPX7 rating, preloaded street maps, topographic mapping, Adventurous Routing and integration with the Tread app. It can also work with compatible group-ride equipment and Garmin’s handlebar controller, with the required accessories depending on the chosen setup.
zūmo XT: compact 5.5-inch alternative
The zūmo XT uses a 5.5-inch ultrabright glove-friendly display and can switch between street, topographic and satellite views. It remains a useful option for riders who prefer its size or already own XT-specific mounts and power equipment. XT, XT2 and XT3 accessories are not automatically interchangeable.
Tread systems
Tread and Tread 2 products are aimed more strongly at powersport and off-road navigation. Availability varies within this collection, and their mounting, mapping and group-ride requirements differ from the road-focused zūmo range. Check the precise device edition and supplied hardware rather than choosing solely by screen size.
Garmin radar and group-ride equipment
The zūmo R1 Radar is not a sat-nav. It mounts near the rear number plate and monitors approaching vehicles and blind-spot areas, sending information to its handlebar indicators and compatible Garmin displays or the zūmo Radar app. Garmin specifies an IP67 enclosure and optional external visibility lights. It provides additional situational information, but it does not replace mirrors, shoulder checks or normal observation.
The Group Ride Tracker is also an accessory rather than a complete navigator. Garmin states that the 5.5-inch version pairs with a compatible Tread or zūmo XT device for location sharing, predefined messaging and route tracking for up to 20 riders without mobile coverage. Newer XT2 and XT3 group communication setups may require a compatible tracker or radio, handlebar controller, Y-adapter and cables. Confirm the device generation and part number before building a system.
Mounts, cables, cases and controllers
More than half of this collection consists of supporting parts. These include automotive and motorcycle mount kits, powered brackets, power leads, weather caps, USB adapters, protective cases and handlebar controls. A part described for zūmo XT will not necessarily fit XT2 or XT3, and even accessories with similar connectors can have different mounting or power requirements.
Before ordering a replacement or second-bike installation kit, identify the full model name on the device and compare it with the compatibility stated in the product title. For XT3, note whether the navigator is the 4.7-inch or 6-inch version because the supplied mounting approach differs. A carrying case only protects the device off the bike; it does not include a navigator, powered mount or charging lead.
Planning a reliable installation
Position the screen where it remains readable without obstructing instruments or restricting steering. Turn the bars fully in both directions before finalising a mount, and make sure cables cannot stretch, chafe or contact hot and moving parts. Permanent motorcycle power leads should be installed with suitable routing and electrical protection. If you are unsure, use a competent motorcycle technician.
For a second motorcycle or car, check whether you need only a bracket, a powered cradle, a wiring lead or a complete kit. Those terms describe different products. The collection includes model-specific automotive mounts as well as motorcycle hardware, so confirm the intended vehicle and device before purchase.
Why buy Garmin motorcycle technology from Moto Central?
Moto Central places complete Garmin motorcycle devices and their supporting parts in one range, allowing riders to compare the current zūmo generations and find the exact mount, cable or case for equipment they already own. Each product page displays the current stock status and listed compatibility, while this guide explains which products are complete systems and which are additions or replacements.
You can compare Garmin with other brands in Motorcycle GPS Systems, then browse installation and touring equipment through Motorcycle Accessories. Riders adding audio guidance or group communication can also explore Motorcycle Intercoms.
Customer questions
Are all products in this collection complete Garmin sat-navs?
No. The range includes complete navigation systems, but most listings are mounts, cables, cases, controls or other accessories. The zūmo R1 is a radar system, and the Group Ride Tracker requires a compatible navigator.
What is the difference between zūmo XT3 4.7 and 6-inch models?
The main distinction is screen and mounting format. Garmin supplies the compact 4.7-inch version with post-mount hardware, while the 6-inch version has a larger display and conventional handlebar mount kit. Check the individual package contents before ordering.
Will a zūmo XT mount fit XT2 or XT3?
Do not assume it will. Garmin lists mounts, powered brackets, power cables and cases by compatible device generation. Match the exact model and part before purchase.
Does the zūmo R1 replace normal blind-spot checks?
No. It supplies rear-approach and blind-spot information as a rider aid. Mirrors, shoulder checks and observation remain essential.
Can Garmin group tracking work without mobile coverage?
Garmin’s compatible Group Ride Tracker and radio systems can provide location sharing without mobile coverage. Compatibility, rider limits, terrain and line of sight affect the setup and performance, so confirm the correct tracker and cables for your navigator.
