LS2 MX701 / FF811 / OF603 Tinted Internal Sun Visor

This genuine LS2 tinted drop-down lens is the internal sun visor for compatible helmet models. It sits behind the main outer visor and can be lowered to help reduce bright light and glare.

Confirmed Compatibility

• MX701 Explorer HPFC
• MX701 Explorer Carbon
• FF811 Vector II HPFC
• FF811 Vector II Carbon
• OF603 Infinity II HPFC
• OF603 Infinity II Carbon

LS2 reference: 800701SVI11. LS2's current accessory tables list this reference for all six ECE 22.06 helmet versions above. Reliable exact-reference documentation also records it for earlier MX701 Explorer, FF811 Vector II and OF603 Infinity II helmets.

Generation and Size Guidance

Later or alternative internal-lens references beginning 806 are also listed for some of these helmet families. Do not choose solely from the helmet name. Compare the reference fitted to the helmet, the original lens or the LS2 parts information where available.

This is an unsized lens used across the relevant helmet-size ranges. The current LS2 shell groups are:

• MX701 Explorer: XS-S / M-L / XL-3XL
• MX701 Explorer Carbon: XS-S / M-L / XL-2XL-3XL
• FF811 Vector II and Vector II Carbon: 2XS-XS / S / M / L / XL / 2XL-3XL-4XL
• OF603 Infinity II and Infinity II Carbon: XS-S / M / L / XL-3XL

Important Part Distinction

This is the small tinted drop-down internal sun visor. It is not the main rigid outer face visor, a Pinlock anti-fog insert, a tear-off film or the MX701 adventure peak. It does not replace the helmet's clear outer visor.

Some distributor records associate this reference with FF901. However, LS2's current FF901 Advant X and Advant X Carbon accessory tables specify later 806701 internal-visor references, so current FF901 compatibility is not claimed here.

Use and Care

A tinted internal visor is intended for suitable daylight conditions. Raise it when light levels fall and do not use it where the tint would impair visibility. Clean with lukewarm water and mild soap. Avoid abrasive cleaners, alcohol and chemical solvents, then pat dry gently.